UTG Tree Talon | JAKT GEAR: Revolutionary Weapon Mounting System for Hunters

The patent-pending UTG Tree Talon | JAKT GEAR transforms how hunters secure their weapons in tree stands and blinds. This innovative UTG Tree Talon | JAKT GEAR mounts directly to your bow, crossbow, rifle, or shotgun, providing a safe, quiet, and secure hanging solution during your hunt.

The UTG Tree Talon | JAKT GEAR seamlessly integrates with JAKT GEAR's Tree Toolbelt or upcoming Waterfowl Blind Toolbelt by hooking into any loose webbing loop for maximum versatility.

NEW FOR 2025 - Limited Pre-Order Opportunity

Pre-order your UTG Tree Talon | JAKT GEAR and UTG Tree Talon Accessories now! All UTG Tree Talon | JAKT GEAR orders placed before April 15, 2025, will be fulfilled from the initial production run, scheduled to ship around June 1st.

Key Benefits of the UTG Tree Talon | JAKT GEAR

Perfect positioning ensures quick access with minimal movement—never miss that shot of a lifetime
No tree screws or attachments required, keeping you legal on all public lands
Eliminates interference from traditional tree hooks that can bang against your weapon
Secure hooking mechanism prevents accidental bumps from causing weapon falls
Compatible with quiver-attached bows, unlike other fixed-position bow-mounted hooks
Stabilizes rifle weight when hooked into the Tree Toolbelt, supporting better shot accuracy

Advanced Design Features

The UTG Tree Talon | JAKT GEAR features an ambidextrous, fully adjustable design. Extend or retract the shaft to position the claw near your weapon's centerline while maintaining hooking clearance. The UTG Tree Talon | JAKT GEAR shaft rotates a full 360 degrees, allowing you to lock the claw in any direction. For optimal stability, we recommend aligning the UTG Tree Talon | JAKT GEAR claw parallel with the gravitational force exerted on your weapon when hanging from the Toolbelt system.

Elevate your hunting experience with the revolutionary UTG Tree Talon | JAKT GEAR weapon mounting system—secure, accessible, and always ready for that perfect shot.

Mount options

Bow-limb Mount

Adjust-to-fit, silicone compression-mounted limb dampeners attach the UTG Tree Talon | JAKT GEAR between the top limbs of spit-limb bows. It has six silicone spacers to customize it to fit most bows with limbs between 0.5" and 1.50" apart.

Pro Tip: Mount as close to the limb pocket of your bow as possible to provide maximum clearance for cam rotation.

2. Picatinny Rail Mount

Mounts to any standard Picatinny Rail with two or more top slots

Shown with optional Swivel Stud-mounted Picatinny Rail (Sold separately)

3. Shotgun/Rifle Barrel Mount

Mount clamps directly to the barrel of your shotgun or rifle. (Fits most 12-gauge and smaller round shotgun and rifle barrels.)

(Image Coming Soon)

Optional Accessories

1. Mathews Silent Connect System (SCS) Adapter

Sold separately, the SCS Adapter attaches the UTG Tree Talon | JAKT GEAR directly to the two holes in the top of the limb pockets of Mathews bows equipped with the Mathews' Silent Connect System. This adapter also serves as a connection point for bow slings and hoist ropes.

The SCS Adapter can be used with any UTG Tree Talon | JAKT GEAR, whether purchased with the Bow-limb Mount, Picatinny Rail Mount, or Shotgun/Rifle Barrel Mount.

Mathews, Silent Connect System, and SCS are trademarks™ or registered® trademarks of Mathews Archery. Their use does not imply any affiliation with or endorsement by them.

2. Swivel Stud-mounted Picatinny Rail

Sold separately, the Swivel Stud-mounted Picatinny Rail attaches through the front swivel stud hole of weapons not factory-equipped with a Picatinny rail.

It has an alternative mounting stud to accommodate a rifle sling below the UTG Tree Talon | JAKT GEAR and is designed for use with the UTG Tree Talon | JAKT GEAR with Picatinny Rail Mount.

3. 45-degree Picatinny Rail Adapter

Sold separately, the 45-degree Picatinny Rail Adapter changes the angle at which the UTG Tree Talon | JAKT GEAR shaft protrudes from your weapon. It is recommended for use with all crossbows to provide limb clearance when hooking into the Tree Toolbelt.

4. M-LOK Adapter

Sold separately, the M-LOK Adapter enables the UTG Tree Talon | JAKT GEAR to be mounted directly to weapons equipped with an M-Lok (Modular Lock) Interface System. This adapter facilitates a slimmer, lighter, and smoother weapon profile than the UTG Tree Talon | JAKT GEAR with Picatinny Rail Mount.)

The M-LOK Adapter can be used with any UTG Tree Talon | JAKT GEAR, whether purchased with the Bow-limb Mount, Picatinny Rail Mount, or Shotgun/Rifle Barrel Mount.

(Image Coming Soon)

Technical Specs

UTG Tree Talon | JAKT GEAR metal components are precision-machined by American craftsmen from aircraft-grade 7075 aluminum.

American-made Stainless Steel hardware with special Black Manganese coating provides the ultimate corrosion-resistant protection.

UTG Tree Talon | JAKT GEAR (Total Weight: 1.589 ounces)
- Mounting Block (Top): 1.125" L x 1.500" W x 0.293" H - 0.466 ounces
- Mounting Block (Bottom): 1.125" L x 1.500" W x 0.293" H - 0.487 ounces
- Mounting Block Hardware: Qty 4, #6-32 x 0.375" {7/64" Hex-drive} Socket Head Cap Screw (SHCS) - 0.043 ounces each
- Talon Shaft: 2.875" L x 0.370" Dia. - 0.345 ounces
- Talon Shaft Set Screw: Qty 1, #6-32 x 0.375" {0.050" Hex-drive} Set Screw - 0.016 ounces
- Talon Claw: 1.673" L x 0.475" W x 0.125" H - 0.108 ounces
Bow-limb mount (Total Weight: 2.351 ounces minimum to 2.849 ounces maximum, based on configuration)
- Silicone Dampeners: Qty 2, 1.5" L x 2.250" W x 0.50" H) 0.917 ounces each
- Silicone Spacers: (Qty: 6 or less, 1.5" L x 0.75" x 0.063" H, 0.063 ounces each
- Bottom Plate: 1.5" L x 1.125" W x 0.125" H - 0.307 ounces
- Mounting Hardware: Qty 2, #10-24 x (1.25", or 1.5" Length - based on # of spacers used) {1/8" Hex-drive} Button Screw - 0.105, 0.135, or 0.165 ounces each. {Use 1.25" length screws if 0 to 3 spacers are required, or 1.5" length if 4 to 6 spacers are required.}
Picatinny Rail Mount (Total Weight: 1.061 ounces)
- Picatinny Clamp (Both Pieces) - 1.125" L x 1.5" W x 0.5" H - 0.639 ounces
- Talon Mounting Hardware: Qty 2, #6-32 x 0.375" {7/64" Hex-drive} SHCS - 0.043 ounces each
- Pic Rail Hardware: Qty 2, #10-24 x 1.25" {5/32" Hex-drive} SHCS - 0.168 ounces each
Shotgun/Rifle Barrel Mount - Specs Coming Soon
Mathews SCS Adapter (Total Weight: 0.603 ounces
- SCS Adapter Block: 1.125" L x 0.400" W x 1.000" H - 0.421 ounces
- Mounting Hardware: Qty 2, #6-32 x 1.5" {7/64" Hex-drive} SHCS - 0.091 ounces each

We recommend using Loctite 222 (Purple low-strength threadlocker for small fasteners) on the threads of all screws used in the assembly of your UTG Tree Talon | JAKT GEAR, mount and adapters. This will prevent fasteners from backing out due to vibration, shock, or thermal expansion but will allow for disassembly/re-assembly.